Have you got something to say? Visit any program page and and use the form in the center column to submit a comment or offer an opinion.

Comments are reviewed before they are posted.

If your comments are posted we will send a notice to the email address you provide.

Your email address will not be posted online.

< < < <    Page 1 of 13   > > > >

Cause of Voids in Leadless Packages

Proper Storage Condition For PCBs

Concerns Regarding Counterfeit Components

What Is the Ideal Humidity for PCB Assembly?

Do Vacuum Packed PCBs Need Baking?

Do Vacuum Packed PCBs Need Baking?

The 30 Second Fix

Leaded Parts Through a Lead Free Wave

What's Causing Blow Holes?

Through Hole Reflow - Pin in Paste

Which Term To Use - PWB or PCB?

Hand Soldering vs. Selective Wave

Hand Soldering vs. Selective Wave

Is There A Thermal Cycle Limit?

BGA Replacement Limit

Accuracy of Pick & Place System Ratings

Are Gloves Required for PCB Handling?

Which Term To Use - PWB or PCB?

Components Lifting During Wave Soldering

Problems with Reflow Oven Profiles?

Components Lifting During Wave Soldering

Conductive Epoxy: Pros and Cons

Does Lead Free Flux Make a Difference?

Is PCB Baking Necessary?

How To Determine Stencil Thickness

Cleaning No-clean Flux with Tap Water

Cleaning Misprinted Circuit Boards

Idle Time Between Soldering and Cleaning

Is Pre-Bake Standard for Rework?

Is PCB Baking Necessary?

Is PCB Baking Necessary?

The Recurring Transmitter Failure

Mixed Components - Leaded and Lead Free

Mixed Components - Leaded and Lead Free

Conformal Coating & Connector Holes

How to Clamp Odd Shaped Circuit Boards

Conformal Coating & Humidity

Type III vs. Type IV Solder Paste

Pin-In-Paste Hole Fill

Alternatives to Conformal Coating

Alternatives to Conformal Coating

BGA Replacement Limit

Cleaning No Clean Boards With IPA

Do Vacuum Packed PCBs Need Baking?

Do Vacuum Packed PCBs Need Baking?

Acceptable Level of Exposed Copper?

Set Up For Lead-Free Wave Soldering

Which Term To Use - PWB or PCB?

Do We Still Need SMT Adhesives?

Is There a Component Rework Limit?

Stencil Thickness: Mixed Density Boards

Stencil Thickness: Mixed Density Boards

Can Conductive Epoxies Replace Solder?

Is Pre-Bake Standard for Rework?

Hand Soldering vs. Selective Wave

Cause of Blow Holes in Wave Soldering

Thermocouple Attachment Review

What Causes Exploding Solder Joints?

What Causes Exploding Solder Joints?

Can a Wave Solder Air Knife Cause Defects?

Switching from Type 3 to Type 4 Solder Paste

Proper Storage Condition For PCBs

Conformal Coating & Humidity

Problems with Reflow Oven Profiles?

Acceptable Level of Exposed Copper

Hand Down The Best

Threat To Privacy From RFID

Problems with Reflow Oven Profiles?

Remote Tracking Network Technology

Is There A Thermal Cycle Limit?

Acceptable Level of Exposed Copper

Pink Snow and the Red Dye Leak

Evolution Helps Computers Solve Problems

Powder Coatings and the Heated Technician

Mixed Components - Leaded and Lead Free

Mixed Cleaning - No Clean and Water Soluble

Stepped Stencils - Rubber or Metal Squeegee?

Alternative to Conformal Coating

Cause Of Defective Solder Joints

Do Vacuum Packed PCBs Need Baking?

Do Vacuum Packed PCBs Need Baking?

Acceptable Level of Exposed Copper

Do Vacuum Packed PCBs Need Baking?

Thermocouple Attachment Review

Which Term To Use - PWB or PCB?

Problems with Reflow Oven Profiles?

Can a Wave Solder Air Knife Cause Defects?

Is There A Thermal Cycle Limit?

Is There A Thermal Cycle Limit?

Is There A Thermal Cycle Limit?

Stepped Stencils - Rubber or Metal Squeegee?

PCB Max Idle Time After Print, Before Reflow

Pick and Place to Insert Radial Lead Devices

Passive Component Solder Voids

Passive Component Solder Voids

Conductive Epoxy: Pros and Cons

Staging time between soldering and cleaning

Switching from Type 3 to Type 4 Solder Paste

Are Gloves Required for PCB Handling?

Having Problems with Reflow Oven Profiles?

Having Problems with Reflow Oven Profiles?

PCB Max Idle Time After Print, Before Reflow